Safety precautions for using valve lathes
Safety precautions for using valve lathes
1 The machine must be grounded reliably to prevent electric shock!
2 The operator must use the operation and safety training of this machine and confirm that he has mastered the necessary knowledge of operation and safety training before using it.
3 The valve lathe can only be operated by one person. It is not allowed to operate the machine at the same time for two or more people.
4 When the machine tool is in debugging or automatic operation, it is strictly forbidden to enter any part of the body into the movement area of the moving parts of the machine tool, otherwise it will cause serious personal injury accident!
5 If the operator has long hair, he must wear a work cap and put the long hair in the cap. The valve lathe can prevent the long hair from entering the moving parts, especially the main shaft pulley.
6 In the cutting process, it is not allowed to remove or touch the chips directly by hand!
7 When cutting, the front and rear sliding doors of the machine must be closed.
8 When an emergency occurs, immediately press the emergency stop switch!
9 When replacing/adjusting the V-belt, cleaning, and repairing the machine, be sure to turn off the power!
10 Comply with safety production regulations.
The address of this article:http://m.58diaosu.com/en/news/379.html
Key word：氣門磨床,氣門車床,氣門設備
Recently browse:
Related products:
Related news:
- How to make the industry of valve lathe processing rise
- What adjusts the clearance of the valve lathe?
- The steps and methods of valve machine fault handling are nothing more than
- So how should the principle and function of the valve device be understood?
- Main features of welding of rod end drilling machine for valve equipment
- Tell me more about how the valve lathe controls the operation.
- Learn about the independent entry and exit of the valve lathe system
- Tiansheng Xiaobian explains to you the classification of engine variable valve equipment intake
- Talk about the special equipment for the valve starting and starting the valve
- What are the advantages of an automatic valve lathe as a guide feed thrust?
